Browse by application

Industrial Flooring & Special Wall Surfacings

No single flooring system can function in every situation. Different chemical reagents attack some types of flooring, but not others. High temperatures and degree of mechanical attack, such as impact and steel-wheeled traffic, also are some parameters which must be considered in system selection. Every situation is unique. IIS will spend time trying to understand your needs then research the problem to determine the solution. Once the solution is resolved, IIS can install a system to protect your investment.

DAIRY TILE and ACID BRICK

  1. Sanitary and corrosion-proof construction
    1. Floors
    2. Walls
    3. Sumps
    4. Trench drains
    5. Curbs and Pedestals
  2. Paving Brick
  3. Architectural/Decorative with architectural joints

HEAVY DUTY FLOOR SURFACINGS

  1. Abrasion & Impact Resistant Surfacings for Aisleways, Loading Docks, Pallet &
    Drum Storage Areas
  2. Surfacings resistant to Thermal Shock for areas of hot water/steam washdowns
    and hot spills
  3. Breathable Surfacings for areas subject to moisture migration from below slab
  4. Conductive; Anti-Static & Static Dissipating Systems for Solvent Storage Areas,
    Other Hazardous Environments, & Sensitive Areas
  5. Cold Temperature curing floors for Freezers, Cold Areas and Areas that require
    fast-turnaround.
  6. USDA and FDA Approved Applications

EXPANSION & CONTROL JOINTS

  1. New or remedial installations
  2. Corrosion-proof sealants
  3. Traffic-bearing
  4. Armored nosings

ELASTOMERIC MEMBRANES

  1. Waterproof membranes for use under monolithic surfacings and acid brick & quarry tile
    2. on suspended slabs to prevent leakage to occupied areas below
  2. Traffic-bearing membranes for pedestrian and/or vehicular traffic where a high incidence
    3. of cracking and leakage exists, for parking garages, pedestrian walkways, and balconies
  3. Corrosion-proof elastomeric membranes for use over concrete where corrosive reagents could penetrate through future cracking

DECORATIVE FLOOR SURFACINGS

  1. Epoxy Quartz Flooring
  2. Vinyl Flake Flooring

Terrazzo

  1. Epoxy Terrazzo
  2. Sand Cushion Terrazzo
  3. Cement Terrazzo
  4. Flexible Rubber Terrazzo

MONOLITHIC WALL SURFACINGS

  1. Smoothing, parging & block filling cement masonry walls to create cleanable,
    sanitary substrates for high performance surfacings
  2. Sanitary coves and rounded internal corners for cleanability and sanitation
  3. Fiberglass reinforced systems for mechanical abuse and crack dampen-ing, especially
    in pharmaceuticals, food plants and clean rooms
  4. High Performance Surfacings and Coatings for corrosion resistance, sanitation.
  5. USDA & FDA Approved Applications

DRAINAGE, PITCHING & REPITCHING

  1. Pre-cast trench drain installation
  2. Pitching new concrete to drains.
  3. Correction of substrate drainage with polymer concrete or epoxy mortar

EQUIPMENT AND MACHINERY RIGGING & HANDLING

  1. Jacking, hoisting, removal and replacement as part of a project.